ویدیو کانورتر فیبر نوری 8 کانال آنالوگ به دیجیتال

مشخصات فنی ویدیو کانورتر فیبر نوری 8 کانال آنالوگ به دیجیتال

Video Specialist:

• Video Input/Output Impedance: 75Ω (unbalanced)
• Video Input/Output Level: 1Vpp nominal
• Video Connector: BNC
• Video Bandwidth: 25Hz to 8MHz
• Video Distorion: <0.5%DG, <0.8°DP
• Weighted Video SNR: >67dB

Data Specialist:

• Data Port: 3.81mm*3
• Electric Standard: RS485
• Baud Rate: 0 – 100Kbps
• BER: < 10-9

Optical:

• Optical Connector: FC/UPC
• Transmitter Wavelength: 1310nm/1550nm
• Tx Transmitter Coupled Power: -5dBm into 9/125um fiber
• Rx Receiver Sensitivity: -20dBm
• Rx Receiver Saturation: -20dBm
• Acceptable highest optic loss budget for single-mode fiber: 15dB

Physical:

• Operating Temperature: -40℃ - +85℃
• Relative Humidity: 0 - 95% non-condensing
• Power Requirements: DC5V
• External Dimensions: 176(L)×131(W)×55(H))
• Weight of Equipment: 520g/pc

General:

• Power Indicator: The normal working of power indicator shows that the input power supply is correct. The irregular working of power indicator shows that the input power supply is not correct or there are some problems about the inner circuit, The equipment need repair.
• Link Indicator: Indicate whether the optical signals is working correct or not.
• Signal indicators: Indicate the video status.
• DTX indicator: Indicate the data output.
• DRX indicator: Indicate the data input. Not use.
• Note: The LED indicators may not indicate the correct operating status without the right connection of fiber.

Certifications:

• CE
• FCC
• RoHS